Made in USA! Need I say more
I think it's a little over priced for what it is. ZR2 bed is the short one which makes this panel super short and narrow as well as it has to fit into the crevice of the bed. If you mount a shovel, you're basically out of space. I guess you could mount a bunch of vertical small pouches like first aid, jumper cables, pouch for bolts, or knick knacks but the space is really just too limited. Hardware is nice but the panel itself would be a better buy at like 80-90 price range.
Just installed two of these (one on each side), and they're solid. I did a lot of research, and considered all the options for MOLLE panels in the bed of my 2018 Colorado ZR2, and I liked these the best. You can get bigger panels that cost a whole lot more, and take up too much room. You can get cheaper panels (not much cheaper) that aren't as solid, and feature rich. These were the perfect combination for me. I was a planning on mounting my Pull Pal with a QuickFist, and hanging one end down to the bed, because I was concerned that these might not hold the weight (~40lbs.?), but once I got them installed, I realized that they will support the full weight, so that's a bonus. Utilizing this little bit of dead space, getting more gear attachment points, and being super sturdy is awesome. They look great; good quality powder coating, and easy to install. I followed the advice of another customer review and modified my oval plastic plugs so that the bolt went through a drilled hole in the center, and cut out some of the plastic in the back so the spanning metal bar has purchase. Then, I also added black silicone adhesive around the seal of the caps to eliminate dust from coming in through all the holes. Because I did this, it took me longer to install, and I had to use a little more elbow grease to get everything lined up, but worth the effort in the end. Would definitely buy again. Thanks Datin!
Hands down one of my favorite accessories added to my truck! Utilizes the empty space well and gives my trucks bed a more tactical appearance.
Good looking easy to install. I actually drilled and trimmed the plastic bed inserts to fully cover the holes. The metal pieces from Datin do not completely seal those holes and I wanted as dust proof an install as possible since I have enclosed canopy and leak enough dust as it is.
- 5 stars: 12 (92%)
- 4 stars: 0 (0%)
- 3 stars: 1 (8%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Made in USA! Need I say more
I think it's a little over priced for what it is. ZR2 bed is the short one which makes this panel super short and narrow as well as it has to fit into the crevice of the bed. If you mount a shovel, you're basically out of space. I guess you could mount a bunch of vertical small pouches like first aid, jumper cables, pouch for bolts, or knick knacks but the space is really just too limited. Hardware is nice but the panel itself would be a better buy at like 80-90 price range.
Just installed two of these (one on each side), and they're solid. I did a lot of research, and considered all the options for MOLLE panels in the bed of my 2018 Colorado ZR2, and I liked these the best. You can get bigger panels that cost a whole lot more, and take up too much room. You can get cheaper panels (not much cheaper) that aren't as solid, and feature rich. These were the perfect combination for me. I was a planning on mounting my Pull Pal with a QuickFist, and hanging one end down to the bed, because I was concerned that these might not hold the weight (~40lbs.?), but once I got them installed, I realized that they will support the full weight, so that's a bonus. Utilizing this little bit of dead space, getting more gear attachment points, and being super sturdy is awesome. They look great; good quality powder coating, and easy to install. I followed the advice of another customer review and modified my oval plastic plugs so that the bolt went through a drilled hole in the center, and cut out some of the plastic in the back so the spanning metal bar has purchase. Then, I also added black silicone adhesive around the seal of the caps to eliminate dust from coming in through all the holes. Because I did this, it took me longer to install, and I had to use a little more elbow grease to get everything lined up, but worth the effort in the end. Would definitely buy again. Thanks Datin!
Hands down one of my favorite accessories added to my truck! Utilizes the empty space well and gives my trucks bed a more tactical appearance.
Good looking easy to install. I actually drilled and trimmed the plastic bed inserts to fully cover the holes. The metal pieces from Datin do not completely seal those holes and I wanted as dust proof an install as possible since I have enclosed canopy and leak enough dust as it is.
Pretty legit product. Finally frees up the box and utilizes the dead space above the wheel wells. Thanks !!!!
Love the molle panels in the bed! I currently have them holding my two trail axes and my shovel and couldn't be happier. Install was direct and east!
Premium quality and easy setup. Also works with the tri-fold tonneau cover on my ZR2
Very happy with the product. Ordered two panels, one for each side. Installation was quick and easy and panels and hardware were of high quality.
Came well packaged and was easy to install.
Little extra research to find the clamps I wanted but looks great and is very functional.
Will definitely be ordering another panel for the other side soon.
Very well made Molle panel, exactly what I needed for the bed of my truck. Easy install
Solid hold, quality materials, and no drilling installation - nice addition for the truck bed. Powder coating is also high quality. Definitely would buy again.
both panels are well made, easy install and look great - cant wait for the front panel